Aluminum Universal Hot Rod Radiator 20" tall x 22 1/2" wide

***THIS IS A SPECIAL CLOSE OUT PRICE. PRICE IS LIMITED TO STOCK ONLY***

For 1940s' to 1970s' vehicles where downflow design is preferred. Typical Ford or Mopar hose locations but will fit any application that requires the lower neck on the left (driver) side and the upper neck on the right (passenger) side. Top neck is 1 1/2" diameter and the lower neck is 1 1/2" diameter.  Overall size is 21" tall including the filler neck and is 21 1/2" wide including the mounting brackets. The width at the tanks is 18 1/2".  The core size is 15" tall x 17" wide.  Has 7 plate aluminum high performance transmission oil cooler with 1/8" NPT threaded fittings on 8 1/2" centers. The core has 2 rows of 1" tubes.
Side brackets are bolted to side channel of radiator and are able to be repositioned to suit your application.

  Aluminum radiators provide better cooling than standard copper radiators of equal thickness due to their 1" wide tubes and closer tube spacing which provides more surface area for heat dissipation. They also weigh substantially less and can add to an engine compartments appearance by polishing to a high sheen.