49-53 Ford 4 Row Copper High Efficiency radiator For Flathead V-8 for passenger car

MADE IN US BECAUSE YOUR CAR WAS NOT MADE IN CHINA


Core dimensions of this radiator are approximately 19 1/2" tall and 20 3/8" wide. This radiator is built with a standard style 3/4" deep filler neck, NOT the "deep" OE style filler neck. You can use a 7 psi radiator cap up to a 13 psi radiator cap with this radiator. The OE style deep filler necks only have caps available in 4 psi or 7 psi versions.
The top hose connections are 1 1/4" diameter and are 10 1/2" apart center to center.
The lower hose connections are 1 3/4" diameter and are 11 3/4" apart center to center.

The high efficiency design of this copper/brass 4 row provides equal or better cooling than lesser quality aluminum replacements.

Fits 49 to 53 Ford passenger cars. See part number 91030 for a truck.

100% Made in USA!! 1 Year Guarantee

These measurements may vary slightly from the original style core that it replaces but it will fit and function the same or better.
US Radiator copper radiators are made to bolt in exactly as a factory replacement radiator would. They are available in several core designs such as three or four rows of 1/2" tubes on 9/16', 7/16" or 5/16" centers. All US Radiators can be ordered with a fan shroud, electric cooling fan and thermostatic fan control. The top tank of the radiator can be polished to show off the vintage brass look. This particular radiator can be ordered in a variety of configurations to suit your cooling needs and your budget. This radiator is also available with necks in top right and bottom left for a later Ford V-8 installation and top left and bottom right for a Chevy engine installation. Either of these would include a transmission oil cooler.