| | |
|
| |
| | |
|
|
57-59 Ford Fairlane Galaxie Griffin Aluminum radiator for FE and Y-Block AT

Griffin 7-70101 57-59 Ford radiator Angeled top tank on 57 to 59 Ford radiator at Classic Radiator |
|
MSRP: $870.00
Price: Call for current pricing
Out of stock at this time. Please e-mail or phone for availability.
Part Number: GR 7-557BB-FAX
Manufacturer: GRIFFIN
Manufacturer Part No: 7-70101 7-557BB-FAX
|
Core dimensions of this radiator are approximately 18" tall and 23 1/2" wide. This particular radiator has a 2" lower neck making it as used with the Y-Block and FE series engines. The upper hose connection is 1 1/2" diameter. With 2 rows of 1.25" tubes, this radiator gives the most cooling available for a bolt in radiator for a 57 to 59 Ford car.
These measurements may vary slightly from the original that it replaces.It will fit the same as and function better than the original.
Even the largest radiator cannot cool properly without good airflow. Consider replacing your stock 4 blade fan with a six or seven blade fan for optimum cooling. Griffin exact fit radiators are made to bolt in exactly as a factory replacement radiator would. All Griffin radiators can be ordered with a fan shroud, electric cooling fan and thermostatic fan control. The top tank of the radiator can be polished to show off the custom aluminum look. It can be ordered without an internal automatic transmission cooler built into the radiator. This particular radiator can be ordered in a variety of configurations to suit your cooling needs and your budget.
This is a normally stocked item. If the inventory on this item shows zero, please contact us to see when we will be getting it back into stock. Call us at 516-293-9026 Monday to Friday 8am to 5pm EST. If you cannot wait for our next stock order, we can have it built and shipped to you directly from the factory at no additional cost.
|
MSRP: $28.95
Price: $24.95
You Save: $4.00 (14 %)
This is the lower hose that goes from the water pump to the lower neck of the radiator on a 57 to 59 full size Ford or Edsel with a 292 Y-Block, 332, 352 or other FE engine. It is Made in America. It does not have OEM Ford part numbers
|
MSRP: $49.95
Price: $39.95
You Save: $10.00 (20 %)
Rated to 8,000 rpm this fan will keep the air flowing through your radiator. It has a 1 3/4" width and a standard automotive hub bolt pattern. A great replacement for an OEM 4 or 5 blade fan.
| |
|
Cap-A-Radiator from Teena Nawabi on Vimeo.
|
|