| | |
|
| |
| | |
|
|
55-57 Chevy Aluminum Radiator 2 rows of 1" tubes and trans cooler
|
|
MSRP: $425.00
Price: $395.00
You Save: $30.00 (7 %)
Part Number: 10040 ALUM AND Z
Manufacturer: US Radiator
Manufacturer Part No: 10040 ALUM AND Z
|
|
US Radiator aluminum radiators are made to bolt in exactly as a factory replacement radiator would. The top neck is 1 1/2" diameter and the lower neck is 1 3/4" on the passenger side. The core measures 17" tall and 21 1/2" wide. It has two rows of 1" tubes on 7/16" centers. The transmission cooler fittings are 1/4" pipe thread. All US Radiators can be ordered with a fan shroud, electric cooling fan, thermostatic fan control and even an A/C condenser. The top tank of the radiator can be polished to show off the modern aluminum look. An internal automatic transmission cooler is built into the radiator. It can be ordered with the mounting straps in the 6 cyl position to move the radiator forward of the radiator support bar to gain additional clearance if required. This particular radiator can be ordered in a variety of configurations to suit your cooling needs and your budget.
|
MSRP: $150.00
Price: $135.00
You Save: $15.00 (10 %)
Formed aluminum fan shroud. Shroud has 15 1/4" hole for electric fan.17" tall and 20.75" wide + .75" mounting tabs on each side. Shroud is 3/4" deep.
|
MSRP: $150.00
Price: $135.00
You Save: $15.00 (10 %)
Formed aluminum fan shroud to mount a 16" electric cooling fan. 17" tall and 20.75" wide + .75" mounting tabs on each side. Shroud is 3/4" deep.
|
Flex-A-Lite 1585 CFM curved blade fan. Draws 13.5 amps. Overall size 16 5/8" X 15 3/4" X 4".
|
Flex-A-Lite 2190 CFM straight blade fan. Draws 11 amps. Overall size 16 5/8" X 16" X 3 1/2"
|
MSRP: $29.95
Price: $24.95
You Save: $5.00 (17 %)
This can be put on your radiator to add an additional touch of aluminum to your engine compartment. The Stant radiator cap underneath will release pressure at 16 psi.
|
SPAL 30102049 2070CFM 16" Fan Curved Blade (Puller). This fan is designed to mount on the engine side of the radiator. The curved blade design keeps fan noise to a minimum.
|
MSRP: $299.00
Price: $259.95
You Save: $39.05 (13 %)
Spal electric cooling fan provides 3000 cfm of air flow. This is a puller fan to be mounted on the engine side of the radiator. It is 3.65" deep at fan motor. This motor is not recommended for normal street duty . It is for race and off road use only.
|
SPAL 30102120 2360CFM 16" Fan Straight Blade (Puller). This fan is designed to mount on the engine side of the radiator. The straight blade design creates maximum airflow.
| |
|
|
|